Submersible Pumps

Download: Submersible Pumps Flyer

PSk2 Centrifugal Solar Pump Systems
SUBMERSIBLE PUMP SYSTEMS FOR 6” AND 8” WELLS

PUMP SYSTEMS PS 9K2 PS 15K2 PS 21K2 PS 25K2
MAX. TOTAL DYNAMIC HEAD (TDH) [m] 180 140 120 200
MAX. FLOW RATE [m3/h] 136 235 218 228
SOLAR OPERATION:        
open circuit voltage (Voc) [V DC] MAX. 850 MAX. 850 MAX. 850 MAX. 850

* PV modules at standard test condition: AM = 1.5, E = 1,000 W/m², cell temperature: 25°C. All specifications and information are given with good intent, errors are possible and products may be subject  to change without notice. Pictures may differ from actual products depending on local market requirements and regulations. A pump system consists of a controller, motor and pump end. Multiple pumps/pump ends are shown to represent the wide range of pumps (over 70) that LORENTZ has.

PS Centrifugal Solar Pump Systems
SUBMERSIBLE PUMP SYSTEMS FOR 4” AND 6” WELLS

PUMP SYSTEMS PS150 C PS600 C PS1200 C PS1800 C PS4000 C
MAX. TOTAL DYNAMIC HEAD (TDH) [m] 20 30 40 100 160
MAX. FLOW RATE [m3/h] 4.6 12 21 53 79
SOLAR OPERATION:          
max. power voltage (Vmp)* [V DC] > 17 > 68 > 102 > 102 > 238
open circuit voltage (Voc) [V DC] MAX. 50 MAX. 150 MAX. 200 MAX. 200 MAX. 375
nominal voltage [V DC] 12-24 48-72 72-96 72-96 168-192
BATTERY OPERATION:          
nominal voltage [V DC] 12 and 24 48 96 96 N/A

    

* PV modules at standard test condition: AM = 1.5, E = 1,000 W/m², cell temperature: 25°C

PS Helical Rotor Solar Pump Systems
SUBMERSIBLE PUMP SYSTEMS FOR 4” AND 6” WELLS

PUMP SYSTEMS PS200 HR PS600 HR PS1200 HR PS1800 HR PS4000 HR
MAX. TOTAL DYNAMIC HEAD (TDH) [m] 50 180 240 250 450
MAX. FLOW RATE [m3/h] 2.6 2.6 2.5 3.9 2.6
SOLAR OPERATION:          
max. power voltage (Vmp)* [V DC] > 34 > 68 > 102 > 102 > 238
open circuit voltage (Voc) [V DC] MAX. 100 MAX. 150 MAX. 200 MAX. 200 MAX. 375
nominal voltage [V DC] 24 – 48 48 – 72 72 – 96 72 – 96 168 – 192
BATTERY OPERATION:          
nominal voltage [V DC] 24 and 48 48 96 96 N/A

 

* PV modules at standard test condition: AM = 1.5, E = 1,000 W/m², cell temperature: 25°C

 

 

U6 Kitawah St, Lonsdale, SA 5160
Phone: 08 8326 5056 

 

Email: admin@powerpumps.com.au